|
Water
Jet Cutting
.
VHP water-jet cutting-out machines with numeric control and fitted with an X-Y table
Cutting range 1200 x 80Omm accuracy
0.1 mm
Cutting range 3 000 x 160Omm accuracy 0. 1 mm
Cutting-out with a pure water jet generates a fine jet with very high energy (speed mach 2 to mach 3)
Pressure: 1000 to 4000 bar. The cohesion of the jet can be improved by the addition of
polymer.
The jet nozzle is not in contact with the material to be cut out, so that there is only a minimal lateral effect on the part. This process does not heat and does not change the structure of the material.
The cut is very clean.
|
